Diodes AL8805 Manuel d'utilisateur télécharger pdf (Page 2)

AL8805

Document number: DS35030 Rev. 4 - 2

2 of 16

www.diodes.com

July 2012

L8805

Pin Descriptions

Pin Number Pin Name Function

1 SW Switch Pin. Connect inductor/freewheeling diode here, minimizing track length at this pin to reduce EMI.

2 GND GND Pin

3 CTRL

Dimming and On/Off Control Input.

• Leave floating for normal operation.

CTRL

= V

REF

= 2.5V giving nominal average output current I

OUTnom

= 0.1/R

)

• Drive to voltage below 0.4V to turn off output current

• Drive with DC voltage (0.5V < V

CTRL

< 2.5V) to adjust output current from 20% to 100% of I

OUTnom

• A PWM signal (low level ≤ 0.4V and high level > 2.6; transition times less than 1us) allows the output

current to be adjusted below the level set by the resistor connected to SET input pin.

4 SET Set Nominal Output Current Pin. Configure the output current of the device.

5 V

Input Supply Pin. Must be locally decoupled to GND with >

2.2µF X7R ceramic capacitor – see applications

section for more information.

Absolute Maximum Ratings (@T

= +25°C, unless otherwise specified.)

Symbol Parameter Ratings Unit

ESD HBM Human Body Model ESD Protection 2.5 kV

ESD MM Machine Model ESD Protection 200 V

Continuous V

Pin Voltage Relative to GND -0.3 to 40 V

SET

SET Pin Voltage Relative to V

Pin -5 to +0.3 V

SW Voltage Relative to GND -0.3 to 40 V

CTRL

CTRL Pin Input Voltage -0.3 to 6 V

SW-DC

DC or RMS Switch current 1.25 A

SW-PK

Peak Switch Current (<10%) 2.5 A

Junction Temperature 150 °C

LEAD

Lead Temperature Soldering 300 °C

Storage Temperature Range -65 to +150 °C

Caution: Stresses greater than the 'Absolute Maximum Ratings' specified above, may cause permanent damage to the device. These are stress ratings only;

functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be

affected by exposure to absolute maximum rating conditions for extended periods of time.

Semiconductor devices are ESD sensitive and may be damaged by exposure to ESD events. Suitable ESD precautions should be taken when handling and

transporting these devices

Recommended Operating Conditions (@T

= +25°C, unless otherwise specified.)

Symbol Parameter Min Max Unit

Operating Input Voltage relative to GND 6.0 36 V

CTRLH

Voltage High for PWM Dimming Relative to GND 2.6 5.5 V

CTRLDC

Voltage Range for 20% to 100% DC Dimming Relative to GND 0.5 2.5 V

CTRLL

Voltage Low for PWM Dimming Relative to GND 0 0.4 V

Continuous Switch Current — 1 A

Junction Temperature Range -40 125 °C

1 2 3 4 5 6 7 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Diodes AL8805 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Diodes AL8805