Diodes AP3583/A Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Diodes AP3583/A. Diodes AP3583/A User Manual [es] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 13
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Data Sheet
Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A
Dec. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited
1
General Description
The AP3583/A is a simple single-phase synchronous
buck controller. It operates from 5V or 12V supply
voltage and delivers high quality output voltage as
low as 0.6V. This device operates at fixed 200kHz
(AP3583) or 300kHz (AP3583A) frequency and
provides an optimum compromise between efficiency,
external component size and cost.
With integrated linear regulator bootstrap diode, and
N-Channel MOSFET gate drives, the AP3583/A can
reduce external component count and board space
requirements.
The AP3583/A supports both tracking mode and
stand-alone mode operation. The output voltage is
tightly regulated to the external reference voltage
from 0.4V to 3V at tracking mode or internal 0.6V
reference at stand-alone mode.
Other features include internal soft-start, under
voltage protection, over current protection and
shutdown function. With aforementioned functions,
this part provides customers a compact, high
efficiency, well-protected and cost-effective
solutions.
The AP3583/A is available in PSOP-8 package.
Features
• Supply Voltage: 5V/12V
V
IN
Input Range: 3.0V to 13.2V
0.6V to 80% of V
IN
Output Range
Internal Reference: 0.6V
• Support Tracking Mode and Stand-alone Mode
• Simple Single-loop Control
Voltage-mode PWM Control
Duty Cycle: 0% to 80%
Fast Transient Response
• Fixed Oscillator Frequency: 200/300kHz
• Lossless, Programmable Over Current Protection
(Uses Lower MOSFET R
DS(ON)
)
• Start-up into Pre-biased Output
• Built-in Thermal Shutdown
• Built-in Soft-start
• Over Current/Voltage Protection
• Under Voltage Protection
• Integrated Boot Diode
Applications
Power Supplies for Microprocessors/Peripherals
PCs, Embedded Controllers, Memory Supplies
DSP and Core Communications Processor
Supplies
Subsystem Power Supplies
PCI, AGP, Graphics Cards and Digital TV
SSTL-2 and DDR/2/3 SDRAM Bus Termination
Supply
Cable Modems, Set Top Boxes, and DSL
Modems
Industrial Power Supplies and General Purpose
Supplies
5V/12V Input DC-DC Regulators
Low-voltage Distributed Power Supplies
Figure 1. Package Type of AP3583/A
PSOP-8
Vue de la page 0
1 2 3 4 5 6 ... 12 13

Résumé du contenu

Page 1

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 2 - Pin Description

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 3 - Ordering Information

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 4

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 5 - Electrical Characteristics

IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the

Page 6

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 7 - Feedback Voltage (V)

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 8

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 9 - Time 40ns/div

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 10

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 11 - Typical Application

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 12 -

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Page 13

Data Sheet Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A

Commentaires sur ces manuels

Pas de commentaire